Flights from the Gilbert, AZ area to the Canton, OH area

27 airport combinations found. Here are the flights you might consider:

$793 McCarran International Airport
Located in Las Vegas, Nevada
to Detroit Metropolitan Wayne County Airport
Located in Romulus (near Detroit), Michigan
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $376

Plus Additional Driving Miles: 413 Estimated Driving Cost: $417

About the driving portion: It is 271 miles from Gilbert to McCarran International Airport. Once at your destination (Detroit Metropolitan Wayne County Airport) you will need to drive 142 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between McCarran International Airport and Detroit Metropolitan Wayne County Airport is $198.00. FareMeasure estimates a round trip ticket will cost you about $376. The total price shown above in green combines both the driving cost and estimated airfare.



$610 Sky Harbor International Airport
Located in Phoenix, Arizona
to Detroit Metropolitan Wayne County Airport
Located in Romulus (near Detroit), Michigan
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $452

Plus Additional Driving Miles: 156 Estimated Driving Cost: $158

About the driving portion: It is 14 miles from Gilbert to Sky Harbor International Airport. Once at your destination (Detroit Metropolitan Wayne County Airport) you will need to drive 142 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Sky Harbor International Airport and Detroit Metropolitan Wayne County Airport is $238.00. FareMeasure estimates a round trip ticket will cost you about $452. The total price shown above in green combines both the driving cost and estimated airfare.



$748 McCarran International Airport
Located in Las Vegas, Nevada
to Pittsburgh International Airport
Located in Findlay (near Pittsburgh), Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $410

Plus Additional Driving Miles: 334 Estimated Driving Cost: $337

About the driving portion: It is 271 miles from Gilbert to McCarran International Airport. Once at your destination (Pittsburgh International Airport) you will need to drive 64 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between McCarran International Airport and Pittsburgh International Airport is $216.00. FareMeasure estimates a round trip ticket will cost you about $410. The total price shown above in green combines both the driving cost and estimated airfare.



$813 McCarran International Airport
Located in Las Vegas, Nevada
to Cleveland Hopkins International Airport
Located in Cleveland, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $490

Plus Additional Driving Miles: 320 Estimated Driving Cost: $323

About the driving portion: It is 271 miles from Gilbert to McCarran International Airport. Once at your destination (Cleveland Hopkins International Airport) you will need to drive 49 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between McCarran International Airport and Cleveland Hopkins International Airport is $258.00. FareMeasure estimates a round trip ticket will cost you about $490. The total price shown above in green combines both the driving cost and estimated airfare.



$785 McCarran International Airport
Located in Las Vegas, Nevada
to Port Columbus International Airport
Located in Columbus, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $414

Plus Additional Driving Miles: 367 Estimated Driving Cost: $371

About the driving portion: It is 271 miles from Gilbert to McCarran International Airport. Once at your destination (Port Columbus International Airport) you will need to drive 97 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between McCarran International Airport and Port Columbus International Airport is $218.00. FareMeasure estimates a round trip ticket will cost you about $414. The total price shown above in green combines both the driving cost and estimated airfare.



$541 Sky Harbor International Airport
Located in Phoenix, Arizona
to Port Columbus International Airport
Located in Columbus, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $429

Plus Additional Driving Miles: 111 Estimated Driving Cost: $112

About the driving portion: It is 14 miles from Gilbert to Sky Harbor International Airport. Once at your destination (Port Columbus International Airport) you will need to drive 97 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Sky Harbor International Airport and Port Columbus International Airport is $226.00. FareMeasure estimates a round trip ticket will cost you about $429. The total price shown above in green combines both the driving cost and estimated airfare.



$553 Sky Harbor International Airport
Located in Phoenix, Arizona
to Pittsburgh International Airport
Located in Findlay (near Pittsburgh), Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $475

Plus Additional Driving Miles: 78 Estimated Driving Cost: $78

About the driving portion: It is 14 miles from Gilbert to Sky Harbor International Airport. Once at your destination (Pittsburgh International Airport) you will need to drive 64 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Sky Harbor International Airport and Pittsburgh International Airport is $250.00. FareMeasure estimates a round trip ticket will cost you about $475. The total price shown above in green combines both the driving cost and estimated airfare.



$544 Sky Harbor International Airport
Located in Phoenix, Arizona
to Cleveland Hopkins International Airport
Located in Cleveland, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $481

Plus Additional Driving Miles: 63 Estimated Driving Cost: $64

About the driving portion: It is 14 miles from Gilbert to Sky Harbor International Airport. Once at your destination (Cleveland Hopkins International Airport) you will need to drive 49 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Sky Harbor International Airport and Cleveland Hopkins International Airport is $253.00. FareMeasure estimates a round trip ticket will cost you about $481. The total price shown above in green combines both the driving cost and estimated airfare.



$639 McCarran International Airport
Located in Las Vegas, Nevada
to Akron-Canton Regional Airport
Located in Akron / Canton, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $357

Plus Additional Driving Miles: 279 Estimated Driving Cost: $282

About the driving portion: It is 271 miles from Gilbert to McCarran International Airport. Once at your destination (Akron-Canton Regional Airport) you will need to drive 9 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between McCarran International Airport and Akron-Canton Regional Airport is $188.00. FareMeasure estimates a round trip ticket will cost you about $357. The total price shown above in green combines both the driving cost and estimated airfare.



$907 Albuquerque International Sunport
Located in Albuquerque, New Mexico
to Detroit Metropolitan Wayne County Airport
Located in Romulus (near Detroit), Michigan
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $439

Plus Additional Driving Miles: 463 Estimated Driving Cost: $468

About the driving portion: It is 321 miles from Gilbert to Albuquerque International Sunport. Once at your destination (Detroit Metropolitan Wayne County Airport) you will need to drive 142 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Albuquerque International Sunport and Detroit Metropolitan Wayne County Airport is $231.00. FareMeasure estimates a round trip ticket will cost you about $439. The total price shown above in green combines both the driving cost and estimated airfare.



$420 Sky Harbor International Airport
Located in Phoenix, Arizona
to Akron-Canton Regional Airport
Located in Akron / Canton, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $397

Plus Additional Driving Miles: 23 Estimated Driving Cost: $23

About the driving portion: It is 14 miles from Gilbert to Sky Harbor International Airport. Once at your destination (Akron-Canton Regional Airport) you will need to drive 9 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Sky Harbor International Airport and Akron-Canton Regional Airport is $209.00. FareMeasure estimates a round trip ticket will cost you about $397. The total price shown above in green combines both the driving cost and estimated airfare.



$832 Tucson International Airport
Located in Tucson, Arizona
to Detroit Metropolitan Wayne County Airport
Located in Romulus (near Detroit), Michigan
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $589

Plus Additional Driving Miles: 241 Estimated Driving Cost: $243

About the driving portion: It is 98 miles from Gilbert to Tucson International Airport. Once at your destination (Detroit Metropolitan Wayne County Airport) you will need to drive 142 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Tucson International Airport and Detroit Metropolitan Wayne County Airport is $310.00. FareMeasure estimates a round trip ticket will cost you about $589. The total price shown above in green combines both the driving cost and estimated airfare.



$778 Albuquerque International Sunport
Located in Albuquerque, New Mexico
to Pittsburgh International Airport
Located in Findlay (near Pittsburgh), Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $390

Plus Additional Driving Miles: 384 Estimated Driving Cost: $388

About the driving portion: It is 321 miles from Gilbert to Albuquerque International Sunport. Once at your destination (Pittsburgh International Airport) you will need to drive 64 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Albuquerque International Sunport and Pittsburgh International Airport is $205.00. FareMeasure estimates a round trip ticket will cost you about $390. The total price shown above in green combines both the driving cost and estimated airfare.



$885 Albuquerque International Sunport
Located in Albuquerque, New Mexico
to Port Columbus International Airport
Located in Columbus, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $464

Plus Additional Driving Miles: 418 Estimated Driving Cost: $422

About the driving portion: It is 321 miles from Gilbert to Albuquerque International Sunport. Once at your destination (Port Columbus International Airport) you will need to drive 97 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Albuquerque International Sunport and Port Columbus International Airport is $244.00. FareMeasure estimates a round trip ticket will cost you about $464. The total price shown above in green combines both the driving cost and estimated airfare.



$637 Tucson International Airport
Located in Tucson, Arizona
to Pittsburgh International Airport
Located in Findlay (near Pittsburgh), Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $473

Plus Additional Driving Miles: 162 Estimated Driving Cost: $164

About the driving portion: It is 98 miles from Gilbert to Tucson International Airport. Once at your destination (Pittsburgh International Airport) you will need to drive 64 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Tucson International Airport and Pittsburgh International Airport is $249.00. FareMeasure estimates a round trip ticket will cost you about $473. The total price shown above in green combines both the driving cost and estimated airfare.



$928 Albuquerque International Sunport
Located in Albuquerque, New Mexico
to Cleveland Hopkins International Airport
Located in Cleveland, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $555

Plus Additional Driving Miles: 370 Estimated Driving Cost: $374

About the driving portion: It is 321 miles from Gilbert to Albuquerque International Sunport. Once at your destination (Cleveland Hopkins International Airport) you will need to drive 49 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Albuquerque International Sunport and Cleveland Hopkins International Airport is $292.00. FareMeasure estimates a round trip ticket will cost you about $555. The total price shown above in green combines both the driving cost and estimated airfare.



$728 Tucson International Airport
Located in Tucson, Arizona
to Cleveland Hopkins International Airport
Located in Cleveland, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $580

Plus Additional Driving Miles: 147 Estimated Driving Cost: $149

About the driving portion: It is 98 miles from Gilbert to Tucson International Airport. Once at your destination (Cleveland Hopkins International Airport) you will need to drive 49 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Tucson International Airport and Cleveland Hopkins International Airport is $305.00. FareMeasure estimates a round trip ticket will cost you about $580. The total price shown above in green combines both the driving cost and estimated airfare.



$761 Tucson International Airport
Located in Tucson, Arizona
to Port Columbus International Airport
Located in Columbus, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $564

Plus Additional Driving Miles: 195 Estimated Driving Cost: $197

About the driving portion: It is 98 miles from Gilbert to Tucson International Airport. Once at your destination (Port Columbus International Airport) you will need to drive 97 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Tucson International Airport and Port Columbus International Airport is $297.00. FareMeasure estimates a round trip ticket will cost you about $564. The total price shown above in green combines both the driving cost and estimated airfare.



$1,008 Palm Springs International Airport
Located in Palm Springs, California
to Detroit Metropolitan Wayne County Airport
Located in Romulus (near Detroit), Michigan
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $587

Plus Additional Driving Miles: 416 Estimated Driving Cost: $421

About the driving portion: It is 274 miles from Gilbert to Palm Springs International Airport. Once at your destination (Detroit Metropolitan Wayne County Airport) you will need to drive 142 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Palm Springs International Airport and Detroit Metropolitan Wayne County Airport is $309.00. FareMeasure estimates a round trip ticket will cost you about $587. The total price shown above in green combines both the driving cost and estimated airfare.



$845 Palm Springs International Airport
Located in Palm Springs, California
to Cleveland Hopkins International Airport
Located in Cleveland, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $519

Plus Additional Driving Miles: 323 Estimated Driving Cost: $327

About the driving portion: It is 274 miles from Gilbert to Palm Springs International Airport. Once at your destination (Cleveland Hopkins International Airport) you will need to drive 49 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Palm Springs International Airport and Cleveland Hopkins International Airport is $273.00. FareMeasure estimates a round trip ticket will cost you about $519. The total price shown above in green combines both the driving cost and estimated airfare.



$959 Palm Springs International Airport
Located in Palm Springs, California
to Pittsburgh International Airport
Located in Findlay (near Pittsburgh), Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $618

Plus Additional Driving Miles: 338 Estimated Driving Cost: $341

About the driving portion: It is 274 miles from Gilbert to Palm Springs International Airport. Once at your destination (Pittsburgh International Airport) you will need to drive 64 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Palm Springs International Airport and Pittsburgh International Airport is $325.00. FareMeasure estimates a round trip ticket will cost you about $618. The total price shown above in green combines both the driving cost and estimated airfare.



$822 McCarran International Airport
Located in Las Vegas, Nevada
to Erie International Airport
Located in Erie, Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $439

Plus Additional Driving Miles: 379 Estimated Driving Cost: $383

About the driving portion: It is 271 miles from Gilbert to McCarran International Airport. Once at your destination (Erie International Airport) you will need to drive 109 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between McCarran International Airport and Erie International Airport is $231.00. FareMeasure estimates a round trip ticket will cost you about $439. The total price shown above in green combines both the driving cost and estimated airfare.



$529 Sky Harbor International Airport
Located in Phoenix, Arizona
to Erie International Airport
Located in Erie, Pennsylvania
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $405

Plus Additional Driving Miles: 123 Estimated Driving Cost: $124

About the driving portion: It is 14 miles from Gilbert to Sky Harbor International Airport. Once at your destination (Erie International Airport) you will need to drive 109 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Sky Harbor International Airport and Erie International Airport is $213.00. FareMeasure estimates a round trip ticket will cost you about $405. The total price shown above in green combines both the driving cost and estimated airfare.



$956 Palm Springs International Airport
Located in Palm Springs, California
to Port Columbus International Airport
Located in Columbus, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $581

Plus Additional Driving Miles: 371 Estimated Driving Cost: $375

About the driving portion: It is 274 miles from Gilbert to Palm Springs International Airport. Once at your destination (Port Columbus International Airport) you will need to drive 97 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Palm Springs International Airport and Port Columbus International Airport is $306.00. FareMeasure estimates a round trip ticket will cost you about $581. The total price shown above in green combines both the driving cost and estimated airfare.



$722 Tucson International Airport
Located in Tucson, Arizona
to Akron-Canton Regional Airport
Located in Akron / Canton, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $614

Plus Additional Driving Miles: 107 Estimated Driving Cost: $108

About the driving portion: It is 98 miles from Gilbert to Tucson International Airport. Once at your destination (Akron-Canton Regional Airport) you will need to drive 9 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Tucson International Airport and Akron-Canton Regional Airport is $323.00. FareMeasure estimates a round trip ticket will cost you about $614. The total price shown above in green combines both the driving cost and estimated airfare.



$911 Albuquerque International Sunport
Located in Albuquerque, New Mexico
to Akron-Canton Regional Airport
Located in Akron / Canton, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $578

Plus Additional Driving Miles: 330 Estimated Driving Cost: $333

About the driving portion: It is 321 miles from Gilbert to Albuquerque International Sunport. Once at your destination (Akron-Canton Regional Airport) you will need to drive 9 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Albuquerque International Sunport and Akron-Canton Regional Airport is $304.00. FareMeasure estimates a round trip ticket will cost you about $578. The total price shown above in green combines both the driving cost and estimated airfare.



$1,384 Palm Springs International Airport
Located in Palm Springs, California
to Akron-Canton Regional Airport
Located in Akron / Canton, Ohio
Map this drive-flight combination   |   View airlines, price history for this flight

Estimated RoundTrip Airfare: $1,098

Plus Additional Driving Miles: 283 Estimated Driving Cost: $286

About the driving portion: It is 274 miles from Gilbert to Palm Springs International Airport. Once at your destination (Akron-Canton Regional Airport) you will need to drive 9 miles to get to Canton. The price above assumes you'll be making a round trip, so driving miles have been doubled.

About the flight: The average one-way fare between Palm Springs International Airport and Akron-Canton Regional Airport is $578.00. FareMeasure estimates a round trip ticket will cost you about $1,098. The total price shown above in green combines both the driving cost and estimated airfare.



How Do I Get There, and What Will it Cost?
Enter any two cities in the continental U.S. We'll tell you what airports and airlines will help you make the trip, and what cost to expect.
Leaving:
Going To:

Find the Closest Airport
Name a city. We'll tell you what airports are nearby, how far you'll have to drive to get there and popular flights in and out.
City:
Or, start by selecting a state: AL |  AR |  AZ |  CA |  CO |  CT |  DC |  FL |  GA |  IA |  ID |  IL |  IN |  KS |  KY |  LA |  MA |  MD |  ME |  MI |  MN |  MO |  MS |  MT |  NC |  ND |  NE |  NH |  NJ |  NM |  NV |  NY |  OH |  OK |  OR |  PA |  RI |  SC |  SD |  TN |  TX |  UT |  VA |  VT |  WA |  WI |  WV |  WY | 

Legal notice: No representation is made or warranty given as to the content and services provided on this Web site. User assumes all risk of use.
New